Dear Colleague:
We would like to invite you to the third International Congress on 3D Printing(Additive Manufacturing) Technologies and Digital Industry (3D-PTC2018) which will take place from 19 to 21 April 2018 at Antalya, Turkey.
The aim of the congress is to bring together universities, industrial organizations, and public institutions from different countries, and to discuss theoretical and practical issues in the fields of 3D printing(Additive Manufacturing) technologies and digital industry. Your prospective, valuable contributions on this field will be evaluated by the scientific committee and the ones approved to be presented will also be published in the conference abstract book. “All accepted papers will be published in supporting journals”
3D Printing(Additive Manufacturing) Technologies and Digital Industry encourages multidisciplinary engineering, medical, dental and practioners. Academics and professionals to identify the challenges and discuss solutions for 3D printing technologies and digital industry welcome scientific and practical contributions from different disciplines and fields.
We are very pleased to invite you to the third International Congress on 3D Printing(Additive Manufacturing) Technologies and Digital Industry (3D-PTC2018) Congress.
Wish to see you all.
3D-PTC2018 Organizing Committee
Topics Congrees ProgramPortobello Hotel Resort&Spa
Konyaalti, ANTALYA-TURKEY
Thursday to Saturday (09:30 AM to 05:00 PM)
April 19 to 21, 2018
Abstract Submission:
25 December 2017
14 January 2018
Notification of Acceptance (Abstract):
15 January 2018
Full Paper Submission:
26 February 2018
Notification of Acceptance:
15 March 2018
Congress Program Announcement:
1 April 2018
"The future of production"
Education Manager, Turkey, Middle East and Africa Autodesk
Evren Arın received his BSc degree in Electronics and Communications Engineering from İstanbul Technical University and his Master of Science degree from Boğaziçi University in 1993 and 1998 respectively. He started his career in the Film-Television industry by working as a manager, designer and lecturer in the digital media field for seven years. Between 2000-2006 Evren Arın worked at Siemens as a systems engineer and technical sales manager in the Information & Communication Networks division. Then he joined Adobe Systems where he held various business development and sales management positions for six years. Since 2013 he has been working at Autodesk as the Education Manager responsible from Turkey, Middle East and Africa region.
.....
"The future of Additive Manufacturing"
Center of Additive Manufacturing and Logistics North Carolina State University USA
Ola Harrysson joined the ISE department in January of 2002 and is teaching courses related to product development, manufacturing processes, additive manufacturing and biomodeling. Most of his research involves additive manufacturing, specifically the medical applications. Dr. Harrysson is in charge of the Additive Manufacturing Laboratory (AML) in the ISE department which houses the first Electron Beam Melting (EBM) machine in the world. AML is currently involved in both aerospace and medical related research as well as providing faculty and students with prototyping services. Most of the aerospace related research involves process and material development for the EBM systems while the medical research is concentrated on custom design and direct metal fabrication of novel implants. Dr. Harrysson has been working for over 10 years with his colleague, Denis Marcellin-Little, who is an orthopedic surgeon at the College of Veterinary Medicine, developing new and innovative implant solutions. The two have pioneered the area of Transdermal Osseointegrated Prosthetics, which is a type of a prosthetic limb that is directly attached to the bone in the stump instead of using an external socket.
...
"Emerging Technologies in 21st Century"
UNESCO Chair on Mechatronics, Bogazici University, Istanbul, Turkey
Okyay Kaynak received the B.Sc. degree with first class honors and Ph.D. degrees in electronic and electrical engineering from the University of Birmingham, UK, in 1969 and 1972 respectively. From 1972 to 1979, he held various positions within the industry. In 1979, he joined the Department of Electrical and Electronics Engineering, Bogazici University, Istanbul, Turkey, where he is presently an Emeritus Professor, holding the UNESCO Chair on Mechatronics. He has hold long-term (near to or more than a year) Visiting Professor/Scholar positions at various institutions in Japan, Germany, U.S., Singapore and China. His current research interests are in the fields of intelligent control and mechatronics. He has authored three books and edited five and authored or coauthored more than 400 papers that have appeared in various journals and conference proceedings. Dr. Kaynak is a fellow of IEEE. He is or has served on the Editorial or Advisory Boards of a number of scholarly journals. In the near past, he served as the Editor in Chief of IEE Trans. on Industrial Informatics and IEEE/ASME Trans. on Mechatronics as well as Co- Editor in Chief of IEEE Trans. on Industrial Electronics. Dr. Kaynak is active in international organizations, has served on many committees of IEEE and was the president of IEEE Industrial Electronics Society during 2002-2003. He received IEEE Third Millennium Medal (2001), IEEE/IES Anthony J. Hornfeck Service Award (2005) and IEEE/IES Dr.-Ing. Eugene Mittelman Achievement Award (2011). Most recently, he received the China Friendship Award (2016) and Humboldt Research Prize (2016).
...
Innovative Additive Manufacturing Technologies
Research Group Leader CSIRO Manufacturing
Stefan has over 30 years of research experience in materials research and technology development at CSIRO and Defence Science Technology Organisation (DSTO). Currently a Research Group Leader at the CSIRO High Performance Metal Industries Program involved in strategic and applied research in Cold spray, Powder Manipulation and Additive Manufacturing (AM) technologies. While working at CSIRO he has developed a wide range of industrial coatings and AM technologies, which have delivered real benefits to the Australian and international industries, resulting in a number of scientific contributions and innovations, as evidenced by his extensive publication and patent list. The most successful are directed towards the manufacturing aerospace, bio-medical, defence, die-casting, printing, powder and metal processing industries. He co-pioneered Cold spray and EBM AM technology in the Southern Hemisphere and continues to develop new research fields in direct powder manipulation and Cold spray Additive Manufacturing technology. Extensive commercialisation and licencing experience with national and international companies and helps develop technologies through to IPO, including the development of a bio-medical manufacturing company at CSIRO.
..
| # | Time | Title | Speakers | Session |
|---|---|---|---|---|
| 1 | 09:30-10:00 | Registration | ... | ... |
| 2 | 10:00-10:15 | Opening Speeches | Prof. Dr. Kerim ÇETİNKAYA | A1 |
| 3 | 10:15-10:45 | Invited Speaker "The future of production" | Evren ARIN | A1 |
| 4 | 10:45-11:15 | Invited Speaker “ Innovative Additive Manufacturing Technologies ” | Dr. Stefan Gulizia | A1 |
| 5 | 11:15-11:45 | Invited Speaker “ Emerging Technologies in 21st Century” | Prof. Dr. Okyay Kaynak | A1 |
| 6 | 11:45-12:00 | Coffee Break | .. | .. |
| 7 | 12:00-13:00 | Lunch | .. | .. |
| 8 | 13:00-14:45 | Chairman:Professor Hüseyin Rıza BÖRKLÜ | A1.Session | |
| 9 | 13:00-13:15 | Ref. No: 3 The 3-D Print Applications In Paleontological Studies | Ahmet İhsan AYTEK | A1 |
| 10 | 13:15-13:30 | Ref. No:12 Personal Custom Hallux Valgus Splint Design For 3d Printer | Ahmet Ali Süzen, Ziya Yıldız, Kıyas Kayaalp and Osman Ceylan | A1 |
| 11 | 13:30-13:45 | Ref. No:18 A Comparison Of Medical Imaging Techniques For 3d Printed Biomodel | Hakan Burçin Erdoğuş | A1 |
| 12 | 13:45-14:00 | Ref. No:25 Designed And 3d Printed Pla Based Upper Extremity Finger Orthosis | Fatih Ciftci and Cem Bülent Üstündag | A1 |
| 13 | 14:00-14:15 | Ref. No:29 Customized Spectacles Using 3D Printing Technology: a Pilot study | Önder Ayyıldız | A1 |
| 14 | 14:15-14:30 | Ref. No:72. Design Of A Haptic Glove: Advanced Rehabilitation For Upper Extremity Mirror Therapy | Taylan Daş, Gökçe Mülazımoğlu, Ömer Faruk Usluoğlu and Dilek Keskin | A1 |
| 15 | 14:30-14:45 | Ref. No:127 Biofabrication of Bone Tissue Scaffold by 3D Bioprinter with Biomimetic Approach | Cansu Gültürk, İlker Emin Dağ, Kadir Sağir, Gökmen Onur Çapar, Mehmet Günalp and Hakan Yilmazer | A1 |
| 16 | 14:45- 15:00 | Coffee Break | ... | A1 |
| 17 | 15:00-16:45 | Chairman :Professor Süleyman GÜNDÜZ | A2.Session | |
| 9 | 15:00-15:15 | Invited Speaker; The Future Trends In Addıtive Manufacturing Technology | Ola Harrysson | A2 |
| 10 | 13:15-13:30 | Ref. No: 10Investigation Of Sand Casting Molds Manufactured By Layered Manufacturing | Ahmet Can and İbrahim Aslan | A2 |
| 11 | 15:30-15:45 | Ref. No:21 Three Dimensional (3D) Model Slicing Methods And Their Effects On The Part To Be Produced | Burhan Duman | A2 |
| 12 | 15:45-16:00 | Ref. No: 82 3D Printing for Neural Tissue Engineering | Gizem Demir, Fatih Ciftci, Askican Hacioglu and Cem Bülent Ustundag | A2 |
| 13 | 16:00-16:15 | Ref. No: 35 Farklı Dolum Yapılmış Nato Mermisinin İç Balistik İncelenmesi | Fatih Ilgın and Mustafa Bozdemir | A2 |
| 14 | 16:15-16:30 | Ref. No:7 Innovative Industrial Design, Laser 3d Print Production Method | Hüseyin Özden | A2 |
| 15 | 16:30-16:45 | Ref. No:75 Investigation of Three Dimensional Design and Manufacturing Technologies Effects of Manufacturing for Design | Ufuk Çifci, Arif Özkan and İrfan Akgül | A2 |
| 16 | 16:45- 17:00 | Coffee Break | ... | A |
| 17 | 17:00-19:00 | Chairman : Professor Dr. Mustafa BOZ | A3.Session | |
| 18 | 17:00-17:15 |
Ref. No: 11 Seçiçi Lazer Sinterleme (Sls) İle Ti6al4v Toz Malzemeden İşleme Parametrelerin Sinterleme Kalitesine Etkisi |
Koray Özsoy, Burhan Duman, Yunus Emre Delikanlı and Mehmet Cengiz Kayacan | A3 |
| 19 | 17:15-17:30 |
Ref. No: 162 Effects On Mechanical Properties Of Raster Angle And Infill Rate İn Pla Based Samples Produced By 3d Printing |
Mustafa Günay, Ramazan Kaçar, Hakan Yılmaz, Halil Demir and Süleyman Gündüz | A3 |
| 20 | 17:30-17:45 |
Ref. No: 173 Flexible Wing Design And Additive Manufacturing For New Generation Bioinspired Unmanned Aerial Vehicles |
Savaş Dilibal, Haydar Şahin and Cihan Candaş | A3 |
| 21 | 17:45-18:00 |
Ref. No: 28 Effects Of Chemical And Surface Modification On Mechanical And Chemical Properties Of Polyester Fabrics |
Zeynep Omerogullari Basyigit | A3 |
| 22 | 18:00-18:15 |
Ref. No: 126 An Example Of Repair-Maintenance Welding Application By Using The Mig-Mag Welding Method With The 3D Metal Printer |
Yusuf Ayan, Ertan Sarı and Nizamettin Kahraman | A3 |
| 23 | 18:15-18:30 |
Ref. No: 189 Gaz Atomizasyon Yöntemi İle Am60 Magnezyum Alaşım Tozu Üretimi Ve Karakterizasyonu |
Tayfun Çetİn, Mehmet AkkaŞ and Mustafa Boz | A3 |
| 24 | 18:30-18:45 |
Ref. No : 174 3 Eksenli Lazer İşleme Makinesi Tasarımı Ve Prototip Üretimi |
Metin Zeyveli, Murat Aydin and Raşit Esen |
A3 |
| 25 | 18:45-19:00 |
Ref. No :176 Ergiyik Biriktirme Yöntemiyle Hafifletilmiş Kişiye Özel Kafatası İmplantın Hızlı Prototiplenmesi |
Koray Özsoy and Mehmet Cengiz Kayacan | A3 |
Lorem ipsum dolor sit amet, consectetur adipisicing elit. Atque aut ducimus facere fugiat molestiae. Accusamus, blanditiis consequuntur distinctio dolores eius, facilis fugiat itaque libero, odio officiis quidem tempora tempore ullam.
Lorem ipsum dolor sit amet, consectetur adipisicing elit. Consequatur hic, sapiente? Accusantium animi at dolorem eveniet facilis fuga odit recusandae reprehenderit soluta? Ab aspernatur consectetur suscipit? Consectetur provident repellat tempora!
Lorem ipsum dolor sit amet, consectetur adipisicing elit. Atque aut ducimus facere fugiat molestiae. Accusamus, blanditiis consequuntur distinctio dolores eius, facilis fugiat itaque libero, odio officiis quidem tempora tempore ullam.
Lorem ipsum dolor sit amet, consectetur adipisicing elit. Consequatur hic, sapiente? Accusantium animi at dolorem eveniet facilis fuga odit recusandae reprehenderit soluta? Ab aspernatur consectetur suscipit? Consectetur provident repellat tempora!
Lorem ipsum dolor sit amet, consectetur adipisicing elit. Atque aut ducimus facere fugiat molestiae. Accusamus, blanditiis consequuntur distinctio dolores eius, facilis fugiat itaque libero, odio officiis quidem tempora tempore ullam.
Lorem ipsum dolor sit amet, consectetur adipisicing elit. Consequatur hic, sapiente? Accusantium animi at dolorem eveniet facilis fuga odit recusandae reprehenderit soluta? Ab aspernatur consectetur suscipit? Consectetur provident repellat tempora!
Lorem ipsum dolor sit amet, consectetur adipisicing elit. Atque aut ducimus facere fugiat molestiae. Accusamus, blanditiis consequuntur distinctio dolores eius, facilis fugiat itaque libero, odio officiis quidem tempora tempore ullam.
Lorem ipsum dolor sit amet, consectetur adipisicing elit. Consequatur hic, sapiente? Accusantium animi at dolorem eveniet facilis fuga odit recusandae reprehenderit soluta? Ab aspernatur consectetur suscipit? Consectetur provident repellat tempora!
Lorem ipsum dolor sit amet, consectetur adipisicing elit. Atque aut ducimus facere fugiat molestiae. Accusamus, blanditiis consequuntur distinctio dolores eius, facilis fugiat itaque libero, odio officiis quidem tempora tempore ullam.
Lorem ipsum dolor sit amet, consectetur adipisicing elit. Consequatur hic, sapiente? Accusantium animi at dolorem eveniet facilis fuga odit recusandae reprehenderit soluta? Ab aspernatur consectetur suscipit? Consectetur provident repellat tempora!
Lorem ipsum dolor sit amet, consectetur adipisicing elit. Atque aut ducimus facere fugiat molestiae. Accusamus, blanditiis consequuntur distinctio dolores eius, facilis fugiat itaque libero, odio officiis quidem tempora tempore ullam.
Lorem ipsum dolor sit amet, consectetur adipisicing elit. Consequatur hic, sapiente? Accusantium animi at dolorem eveniet facilis fuga odit recusandae reprehenderit soluta? Ab aspernatur consectetur suscipit? Consectetur provident repellat tempora!
| # | Time | Title | Speakers | Session |
|---|---|---|---|---|
| 1 | 13:00-14:45 | Chairman :Assoc. Professor Serap ÇELEN | B1.Session | |
| 2 | 13:00-13:15 | Ref. No:191 Common Use Of Industrial Robots And Plc In Production | Enes Efe and Mucİz Ozcan | B1 |
| 3 | 13:15-13:30 | Ref. No:33 Sargılı Tip Elektromanyetik Fırlatıcı Prototipi Geliştirilmesi | Ahmet Bülent Gülver and Mustafa Bozdemir | B1 |
| 4 | 13:30-13:45 | Ref. No:43 Design and Production of PCB Machine for Electronic Circuits | Murat Aydin, Mesut GÜlez and Ahmet IŞik | B1 |
| 5 | 13:45-14:00 | Ref. No:65 The Importance of Big Declaration in Cloud Robots | Bekir Aksoy and Atılgan Temİr | B1 |
| 6 | 14:00-14:15 | Ref. No:98 Engelli Araçlar İçin Aparat Tasarımı Ve Fdm 3b Yazıcı Uygulaması | İbrahim Yavuz, Ahmet Fatih Yuran, Muhammed Esad | B1 |
| 7 | 14:15-14:30 | Ref. No:198 The Use Of A 3d Printer For Developing A Distance Sensor Calibration Tool | Gokhan Bayar, Elif Ulusal and Goktug Hambarci | B1 |
| 8 | 14:30-14:45 | Ref. No: 17 Dijital Endüstri Mimarisinin Siyah Tuğlaları: 3 Boyutlu Karbon Elektronik Cihazlar | Serap Çelen | B1 |
| 9 | 14:45- 15:00 | Coffee Break | ||
| 10 | 15:00-16:45 | Chairman :Professor Ramazan KAÇAR | B2.Session | |
| 11 | 15:00-15:15 | Ref. No: 169 Effect Of Temperature On Conductivity Of Pla-Carbon 3d Printed Components | David Hughes And Emeka Amalu | B2 |
| 12 | 15:15-15:30 | Ref. No: 23 3D Printer + Cnc System Design And Prototype | Deniz Altunkaynak and Kerim Çetinkaya | B2 |
| 13 | 15:30-15:45 | Ref. No: 192 Hücresel Yapılı Tasarımlarda Hacimsel Boşluk Değerinin Belirlenmesine Yönelik Matematiksel Yaklaşım | Ahmet Murat Dursun, Rahmi Ünal, Oğuzhan Yılmaz and Elmas Salamcı | B2 |
| 14 | 15:45-16:00 | Ref. No: 60 3b Yazıcı İle Pla Malzemeden Üretilmiş İnce Kirişlerin Yazdırma Yönelim Açısının Kirişlerin Doğal Frekansına Etkisi | Tuğçe Tezel, Gökmen Atlıhan, Volkan Kovan and Eyüp Sabri Topal | B2 |
| 15 | 16:00-16:15 | Ref. No: 80 3D Printed Mold Development For Fabrication Of High Aspect Ratio Pdms Micropillars | Ahmet Erten, Aysenur Eser, Adil Mustafa, Ali C. Aksu and Ozlem Yalcin | B2 |
| 16 | 16:15-16:30 | Ref. No: 160 Titanium Implant For Dental Applications Using 3d | Senai Yalcinkaya, Ebuzer Aygul and Yusuf Sahin | B2 |
| 17 | 16:30-16:45 | Ref. No: 92 3 Boyutlu Baskının Mobilya Sektöründe Ürün Tasarımındaki Kullanım İmkanlarının Araştırılması | Ebru Gedik, Abdullah Toğay, Merve çoşkun and Emrah Demirhan | B2 |
| 18 | 14:45- 15:00 | Coffee Break | ||
| 19 | 17:00-19:00 | Chairman : Professor Mustafa AYDIN | B3.Session | |
| 20 | 17:00-17:15 | Ref. No: 6 FDM Yöntemle Üretilen Prototiplerin Yüzeylerine Yapılan işlemlerin Mukavemet Üzerine Etkisinin Araştırılması | Hakan Maden, Ömer Şaban Kamber, Haydar UĞur, Alim İgnecİ and Erkan Dİpcİn | B3 |
| 21 | 17:15-17:30 | RRef. No: 30 3D Manufacturing Applications in Aviation Industry in Accordance with Airworthiness Rules and Regulations | Mustafa Bozdemir | B3 |
| 22 | 17:45-18:00 | Ref. No: 61 Hibrit İmalat: Eklemeli İmalat İle Geleneksel İmalat Yöntemlerinin Birlikte Kullanılabilirliğinin İncelenmesi | Tuğçe Tezel, Eyüp Sabri Topal and Volkan Kovan | B3 |
| 23 | 18:00-18:15 | Ref. No: 161 Optical 3d Scanner Technology | Senai Yalcİnkaya, Burak Yildiz and Mazlum Borak | B3 |
| 24 | 18:15-18:30 | R Ref. No: 196Evaluation of the structural differences between additive manufacturing and traditional manufacturing for production of Nickel-Titanium Alloys | Gozde S. Altug-Peduk, Savas Dilibal, Sunullah Ozbek and Ola Harrysson | B3 |
| 25 | 18:30-18:45 | Ref. No: 67 Investigation of the PLA filament process performance at different printing parameters and comparision with results of finite element method | Mustafa Aydin, Ferhat Yildirim, Ebubekir Çanti and Kadir Gok | B3 |
| 26 | 18:45-19:00 | Ref. No : 175 3 Eksen Kartezyen Çizim Yapan Robot Tasarımı Ve Üretimi | Metin Zeyveli, Murat Aydin and Raşit Esen | B3 |
| # | Time | Title | Speakers | Session |
|---|---|---|---|---|
| 1 | 13:00-14:45 | Chairman :Professor Ömer ANDAÇ | C1.Session | |
| 2 | 13:00-13:15 | Ref. No:5 Seperatörlü Elektrik Motoru için Geliştirilen Seperatör Tasarımının Prototiple Üretip Test Etmek için Uygun Üretim Yöntemi Bulunması | Hakan Maden, Ömer Şaban Kamber, Bilal Özsarikaya and Burak Recep Kamber | C1 |
| 3 | 13:15-13:30 | REf. No : 26 Designing and 3D Printed PLA Based Implant Used in Treatment for Unilateral Vocal Fold Paralysis | Fatih Ciftci and Cem Bülent Üstündag | C1 |
| 4 | 13:30-13:45 | Ref. No: 16 Fused Deposition Modelling (Fdm) Application İn Aviation: 3d Scaled Model Of Boeing 737-800 | Hüseyin Caner Gökçe, Mustafa Özgür Öteyaka and Isil Yazar | C1 |
| 5 | 13:45-14:00 | Ref. No: 39 Havalı Tabancalar İçin 3d Silah Susturucu Tasarımı | Mustafa Bozdemir | C1 |
| 6 | 14:00-14:15 | Ref. No: 44 Design and Production of Diamond Hotend Multicolor 3D Printer | Murat Aydin, Merve Zİylan, Simge SolakoĞlu and Sümeyye Ceren EroĞlu | C1 |
| 7 | 14:15-14:30 | Ref. No: 77 Pcb Rooter Yazıcı Sistemi Ve Prototip İmalatı | Mustafa Aydin, YİĞİt Emre Özertay, Yusuf KÜÇÜkfİdan, GÖksu Yanar and Murat Aydın | C1 |
| 8 | 14:30-14:45 | Ref. No: 168 The Modeling Of Special Manufacturing Materials By Using 3d Laser Scanning And Measuring Technology | Senai Yalcinkaya and Acar Can Kocabicak | C1 |
| 9 | 14:45- 15:00 | Coffe Break | ||
| 10 | 15:00-16:45 | Chairman : Professor M. Cengiz KAYACAN | C2.Session | |
| 11 | 15:00-15:15 | Ref. No: 9 Industry 4.0, Revolution And Reflections Of Expected In Turkey | Hüseyin Özden | C2 |
| 12 | 15:15-15:30 | Ref. No: 24 4D Printers in Industry 4.0 and Effects on Supply Chain Management | Ahmet Naci Ünal and Mehmet Sıtkı Saygılı | C2 |
| 13 | 15:30-15:45 | Ref. No: 34 Barutun Mermi Üzerine Etkileri Ve Balistik Yörünge Simülasyonu | Fatih Ilgın and Mustafa Bozdemir | C2 |
| 14 | 15:45-16:00 | Ref. No: 99 Dijital Endüstri Çağında Ürün Tasarımcısı: Teknolojinin Etkisinin Bilgisayar Destekli Tasarım Araçları Üzerinden İncelenmesi | Abdullah Togay, Ebru Gedik and Merve Coşkun | C2 |
| 15 | 16:00-16:15 | Ref. No: 108 A Short Review On 4d Printing | Fraz A. Khan, Hüseyin Kürşat Çelik, Okan Oral and Allan E.W. Rennie | C2 |
| 16 | 16:15-16:30 | Ref. No: 122 "Lightning" Effect On Blockchain Technology | Yusuf Özen and Cemal Köse | C2 |
| 17 | 16:30-16:45 | Ref. No: 163 Optimization Of 3d Printing Operation Parameters For Tensile Strength İn Pla Based Sample | Mustafa Günay, Süleyman Gündüz, Hakan Yılmaz, Nafiz Yaşar and Ramazan Kaçar | C2 |
| 18 | 16:45-17:00 | Coffee Break | C2 | |
| 19 | 17:00-19:00 | Chairman :Professor Nizamettin KAHRAMAN | C3.Session | |
| 20 | 17:00-17:15 | Ref. No: 13 Internet Controlled Smart Tea Machine Design With Arduino And Tea Consumption Analysis | Kıyas Kayaalp, Ahmet Ali Süzen, Osman Ceylan and Ziya Yıldız | C3 |
| 21 | 17:15-17:30 | Ref. No: 14 Device Design For Determining The Presence And Grade Of Scoliosis | Ahmet Ali Süzen, Ziya Yıldız, Kıyas Kayaalp, Osman Ceylan and Emre Arabaci | C3 |
| 22 | 17:30-17:45 | Ref. No:131 Isı Ve Sıcaklık Konusunda Akıllı Mobil Cihaz Uygulaması Geliştirme | Okan Oral, Volkan GÖk, Mustafa Kemal Yildiz and Mehmet Eyüp KİrİŞ | C3 |
| 23 | 17:45-18:00 | Ref. No: 197 Comparative Investigation Of 3d Printing And Traditional Wax Modelling In Investment Casting For Sculpture Applications As A Case Study | Merih Şengönül, Hakan Kalkan, Özgün Ogretmen, Kaan Inam, Volkan Burak Oktay, Umut Tolga Cubukcu and Yahya Tunç. | C3 |
| 24 | 18:00-18:15 | Ref. No: 37 Yorgun Mermilerin Atmosferdeki Hareketi Ve Hedef Üzerinde Oluşturduğu Etkiler | Hüseyin Üstüner and Mustafa Bozdemir | C3 |
| 25 | 18:15-18:30 | Ref. No: 68 Conceptual Desıgn Of A Supermarket Trolley With Barcode Reader | H. Rıza Börklü, Fatih Çıkışır and Cemile Şanlıer | C3 |
| 26 | 18:30-18:45 | Ref. No: 83 Using Fuzzy Waspas Method to Select Sustainable and Environmental Friendly Packaging Alternatives | Hande Erdogan Aktan, Ömür Tosun and M.K. Marichelvam | C3 |
| 27 | 18:45-19:00 | Ref. No : 178 Fusion 360 Cam Application On Servo Controlled Desktop Cnc Machines | Burak Di̇ndar, Salih Ogün İsak and Kerim Çetinkaya | C3 |
| # | Time | Title | Speakers | Session |
|---|---|---|---|---|
| 1 | 09:00-09:30 | Registration | ||
| 2 | 09:30-11:00 | Chairman :Assist. Professor Hakan YILMAZER | A4.Session | |
| 3 | 09:30-09:45 | Ref. No: 87 3D Printed Implantable Hydrogel Drug Design for Schizophrenia | Askican Hacioglu, Fatih Ciftci, Reyhan Yanikoglu, Taylan Baran Yesil and Cem Bulent Ustundag | A4 |
| 4 | 09:45-10:00 | Ref. No: 96 Pelvix Kemiği Kırığının Modellenmesi Ve Fdm 3b Yazıcı İle Üretiminin Gerçekleştirilmesi | Ahmet Fatih Yuran and Muhammed Esad Çakir | A4 |
| 5 | 10:00-10:15 | Ref. No: 125 Multihead Bioprinter Development by Converting Fuse Deposition Modelling (FDM) type 3D Printer | Aybüke Aydoğan, Yasin Bozkurt Yılmaz, Tutku Tuğ and Hakan Yilmazer | A4 |
| 6 | 10:15-10:30 | Ref. No: 133 Sağlıkta Gelişen Teknoloji: Üç Boyutlu Yazıcılar | Nurten Arslan, Meltem KÜrtÜncÜ, Nur Deniz EyÜpoĞlu and Birgül Yaylaci | A4 |
| 7 | 10:30-10:45 | Ref. No: 140 Multifonksiyonel Nanokompozitlerin 3B Baskısı: Elektrik İletkenliğine Etkisi | Ogulcan Eren and Huseyin Kursad Sezer | A4 |
| 8 | 10:45-11:00 | Ref. No: 152 3b Yazıcı Kullanarak Evcil Hayvanlar İçin Medikal Protez Ve Ortez Üretimi | Ahmet Gürol Kalaycı, Serkan Ceylan and Özdemir Deniz | A4 |
| 9 | 11:00- 11:15 | Coffe Break | ||
| 10 | 11:15- 12:45 | Chairman :Assist. Professor Ahmet SAMANCI | A5.Session | |
| 11 | 11:15- 11:30 | Ref. No: 124 Multiple Noise Removal In Color Images | Ahmet Ulu and Bekir Dizdaroğlu | A5 |
| 12 | 11:30-11:45 | Ref. No: 130 Conceptual Design Of Aninnovative Lawn Mower Machine | Hüseyin Rıza Börklü and Fulya Erdemi̇r | A5 |
| 13 | 11:45- 12:00 | Ref. No: 132 IoT and M2M Connectivity for Real-time Control of Industrial Processes | Hakkı Soy and Sabri Koçer | A5 |
| 14 | 12:00- 12:15 | Ref. No: 195 Common Fdm 3d Printing Defects | Kadir Günaydın and Halit Süleyman Türkmen | A5 |
| 15 | 12:15- 12:30 | Ref. No : 151 3B Yazıcı Tabanlı İnce Film Kaplama Cihazının Geliştirilmesi | Ahmet Gürol Kalaycı and Özdemir Deniz | A5 |
| 16 | 12:30- 12:45 | Ref. No: 149 4 Eksenli Cnc Kontrollü Strafor Kesme Tezgahı Tasarımı Ve Prototip Üretimi | Ahmet Samancı, Ahmet Can and Okan Kılıç | A5 |
| 17 | 12:45-14:00 | Lunch | ||
| 18 | 14:00-15:30 | Chairman :Assist. Professor Okan ORAL | A6.Session | |
| 19 | 14:00-14:15 | Ref. No:201 The Advantages and The Disadvantages of Using 3D Printing Technologies in Architectural Design Process | Ömer Faruk Bayram, Atacan Akgün | A6 |
| 20 | 14:15-14:30 | Ref. No: 73 Nebulizer Body Desing And Prototype For 1-10 Age Kids | Enes Erdİl, E.Hale İpek, Kerim Çetİnkaya, Nurten Arslan, Birgül Yaylacı, Nurdeniz Eyüpoğlu and Meltem Kürtüncü | A6 |
| 21 | 14:30-14:45 | Ref. No: 22 Three Dimensional Powder And Granular Mixer Prototype And Manufacturing | Fatih Huzeyfe ÖztÜrk, Özkan Öz and Kerim Çetinkaya | A6 |
| 22 | 14:45-15:00 | Ref. No : 86 Design And Prototype Of Functional Ceramic Laser Marking 3-Dimensional Printer | Abdurrahİm Temİz, Mustafa Bozkurt, Mehmet Engİn KosİfoĞlu and Zehra Gİzem İdeal | A6 |
| 23 | 15:00-15:15 | REf. No: 121 Sağlık Sektöründe 3 Boyutlu Yazıcı Uygulamaları: Mevcut Durumu Ve Geleceği | Süleyman Bilgin, Okan Oral and Gülçin Akbaş | A6 |
| 24 | 15:15-15:30 | Ref. No: 155 The Actual Position, Development And Future Aspects Of The 3d Printer Technology In Food Industry | Fatma Coşkun Topuz, Emre Bakkalbaşı and İsa Cavidoğlu | A6 |
| 25 | 15:30- 15:45 | Coffee Break | A6 | |
| 26 | 15:45-17:15 | Chairman :Assist. Professor Binnur SAĞBAŞ | A7.Session | |
| 27 | 16:00-16:15 | Ref. No: 120 Dimensional Metrology For Additive Manufacturing | Binnur Sağbaş and Tahir Hakan Boyacı | A7 |
| 28 | 16:15-16:30 | Ref. No: 194 The Effect Of Layer Thickness To The Tensile Stress: Experimental Studies | Kadir Günaydın and Halit Süleyman Türkmen | A7 |
| 29 | 16:30-16:45 | Ref. No: 138 3D Beton Üretimi İçin Mermer Tozu Ve Seramik Artıklarının Kullanılmasının Araştırılması | Ali Erdem ÇerÇevİk, Yusuf Cengiz Toklu and Süheyla Yerel Kandemİr | A7 |
| 30 | 16:45-17:00 | Ref. No: 141 Tersine Mühendislik Tasarımı: Endüstriyel Tasarım Mühendisliği Lisans Öğrencileri için Teknik Seçmeli Ders | Ogulcan Eren, Hüseyin Kürşad Sezer and Hüseyin Rıza Börklü | A7 |
| 31 | 17:00-17:15 | Ref. No: 145 3 Boyutlu Yazıcılarda Kompozit Parça İmalatı İçin Fotopolimer Reçine İle Kompozit Lif Üretimi | Mehmet Ermurat, Muhammed Enes Gebel and Semih Korkmaz | A7 |
| 32 | 17:15- 17:30 | Coffee Break | A7 | |
| 33 | 17:30-19:00 | Chairman : Assoc. Professor Arif ÖZKAN | A8.Session | |
| 34 | 17:30-17:45 | Ref. No: 153 3B Yazıcılar İçin Android Tabanlı Kontrol Ve Kalibrasyon Yazılımı Geliştirilmesi | Ahmet Gürol Kalaycı, Serkan Ceylan and Özdemir Deniz | A8 |
| 35 | 17:45-18:00 | Ref. No : 146 Tasarımda Yerli Ürün Dijital Verilerinin Kullanımı | Elif Yazgül Yazgan, Sümeyye Ceren Eroğlu, Simge Solakoğlu and Kerim Çetinkaya | A8 |
| 36 | 18:00-18:15 | Ref. NO: 85 Design And Implementation Of A Solar Catamaran Model With 3d Printer And Sensor Applications | Kubilay Bayramoğlu, Kerim Deniz Kaya and Semih Yilmaz | A8 |
| 37 | 18:15-18:30 | Ref. No: 139 3D Baskı Teknolojisi Kullanarak Yapı Üretiminin Son Dönem Yeniliklerinin Araştırılması | Ali Erdem ÇerÇevİk, Süheyla Yerel Kandemİr and Yusuf Cengiz Toklu | A8 |
| 38 | 18:30-18:45 | Ref. No: 156 Kazma Mekanizmalarında Biyomimetik Uygulamalarının İncelenmesi | Alkın Yılmaz Akter and Hüdayim BaŞak | A8 |
| 39 | 18:45-19:00 | Ref. No: 177 Otomotiv Endüstrisinde Vaka Çalışmalarıyla 3 Boyutlu Prototip Uygulamalarındaki Son Gelişmeler | Ipek Hasipek and Hüseyin Kürşad Sezer | A8 |
| 40 | 19:00-19:15 | Ref. No:15 Üç Boyutlu (3b) Yazıcı Teknolojisinin Eğitimde Uygulanabilirliği: Senirkent Meslek Yüksekokulu Örneği | Koray Özsoy | A8 |
| # | Time | Title | Speakers | Session |
|---|---|---|---|---|
| 1 | 09:00-09:30 | Registration | ||
| 2 | 09:30-11:00 | Chairman :Assist. Professor Cem Bülent ÜSTÜNDAĞ | B4.Session | |
| 3 | 09:30-09:45 | Ref. No: 19 3D Printed Ceramic Vases | Sanver Özgüven | B4 |
| 4 | 09:45-10:00 | Ref. No: 117 Support Structure For Direct Metal Laser Sintering/Melting | Koray Özsoy and Burhan Duman | B4 |
| 5 | 10:00-10:15 | Ref. No: 36 Sabit Ve Değişken Helis Açılı Yiv-Sete Sahip Namluların Balistik Açıdan İncelenmesi | Hüseyin Üstüner And Mustafa Bozdemir | B4 |
| 6 | 10:15-10:30 | Ref. No: 47 A Revıew On The Hydrogels Used In 3d Bioprinting | Mehmet Topuz, Burak Dikici, Mehmet Gavgalı And Hakan Yilmazer | B4 |
| 7 | 10:30-10:45 | Ref. No: 57 Eklemeli İmalat Yöntemlerinde Kullanılan Malzemeler | Mehmet Alper Demiray, Bahri Şekerci, Osman Saltik And Mehmet Cengiz Kayacan | B4 |
| 8 | 10:45-11:00 | Ref. No: 66 Design And Production Of Ceramic Laser Marking Printer | Murat Aydin, Burak Güneş, Burak Dindar And Talha Çapaci | B4 |
| 9 | 11:00- 11:15 | Coffe Break | ||
| 10 | 11:15- 12:45 | Chairman :Professor Mustafa BOZDEMİR | B5.Session | |
| 11 | 11:15- 11:30 | Ref. No : 150 Çekvalf Sistemli Housing Kapağının Tasarımının Geliştirilip Prototip Parça Üzerinde Testlerin Yapılması | Ömer Şaban Kamber | B5 |
| 12 | 11:30-11:45 | Ref. No: 164 İnşaat Mühendisliği Beton Araştırma Labaratuvarları İçin 3b Yazıcı İle Beton Kalıbı Üretimi | Ahmet Köbeloğlu And Kerim Çetinkaya | B5 |
| 13 | 11:45- 12:00 | Ref. No: 84 Remote Monitoring For Automation Devices In Textile Industry With Iot And Web Technologies | Ulaş Dikme | B5 |
| 14 | 12:00- 12:15 | Ref. No: 41 Yüzey Pürüzlüğü Belirlemede Yapay Zeka Kullanımı | Mustafa Bozdemir | B5 |
| 15 | 12:15- 12:30 | Ref. No: 165 Analysis Of Effects On Tensile And Compression Behaviors Of Different Printing Formats In Three Dimensional Printing | Aysu Akilli, Harun Yaka, Arif Gök And Oğuzhan Bildik | B5 |
| 16 | 12:30- 12:45 | Ref. No: 188 Investigation Of Gas Pressure Effect On Powder Characterization Of Az31 Alloy Produced By Gas Atomization Method | Kamal Mohamed Em Akra, Mehmet Akkaş, Tayfun Çetin And Mustafa Boz | B5 |
| 17 | 12:45-14:00 | Lunch | ||
| 18 | 14:00-15:30 | Chairman :Assist. Professor Senai YALÇINKAYA | B6.Session | |
| 19 | 14:00-14:15 | Ref. No : 70 Structural Analysis And Optimization Of H Type Hydraulic Press | Fatih Mehmet Mesut Elmas, Osman Turhan And Murat Dilmeç | B6 |
| 20 | 14:15-14:30 | Ref. No: 167 Gear Printing In 3d Printers And Analysis Of Mechanical Behaviors | Aysu Akilli, Harun Yaka, Arif Gök And Oğuzhan Bildik | B6 |
| 21 | 14:30-14:45 | Ref. No: 144 A Perspective On Exploiting The Design Freedom Of 3d Printers In Jewellery Industry | Ceren Kiraz, Hüseyin Kürşad Sezer And İsmail Şahin | B6 |
| 22 | 14:45-15:00 | Ref. No:171 Preventing Of The Transmission Of The Useless/Repeated Data To The Network In Internet Of Things | Tuğrul Çavdar, Ercüment Öztürk And Ahmet Ulu | B6 |
| 23 | 15:00-15:15 | Ref. No: 100 Nesnelerin İnterneti: Tasarımında Yeni Ürün Paradigması Olarak Iot Ürünler | Merve Coşkun And Abdullah Togay | B6 |
| 24 | 15:15-15:30 | Ref. No: 110 Nesnelerin İnterneti Teknolojinin Tarımsal Alanda Uygulamaları | Adem Comart, Okan Oral And Nuri Çağlayan | B6 |
| 25 | 15:30- 15:45 | Coffee Break | B6 | |
| 26 | 15:45-17:15 | Chairman :Assoc. Professor Mustafa GÜNAY | B7.Session | |
| 27 | 15:45-16:00 | Ref. No: 42 Yapay Sinir Ağı Desteğiyle Pa6g Malzemelerde Nem Faktörünün Değerlendirilmesi | Mustafa Bozdemir | B7 |
| 28 | 16:00-16:15 | Ref. No : 56 Ergiyik Biriktime Yöntemiyle İmal Edilen Eklemeli İmalat Parçalarının Boyutsal Doğruluğunun Araştırılması | Yusuf Sacid Bardakçi, Mert Gürgen And Mehmet Cengiz Kayacan | B7 |
| 29 | 16:15-16:30 | Ref. No: 89 3B Yazıcıda Titreşimin Ürünlerin Mekanik Özelliklerine Etkisinin İnclelenmesi | Menderes Kam, Hamit Saruhan And Ahmet İpekçi | B7 |
| 30 | 16:30-16:45 | Ref. No: 91 Karmaşık İlişkileri Tanımlayan Yeni Bir Strateji: Big Data | Özgür Selvi | B7 |
| 31 | 16:45-17:00 | Ref. No: 166 Comparison The Effects Of Printing Positions On Mechanical Behavior In 3d Printers | Aysu Akilli, Harun Yaka, Arif Gök And Oğuzhan Bildik. | B7 |
| 32 | 17:00- 17:15 | Ref. No: 111 Investigation The Effect Of Support Structure On Residual Stress By Simufact Additive Software | B7 | |
| 33 | 17:15- 17:30 | Coffee Break | ||
| 34 | 17:30-19:00 | Chairman : Assist. Professor H.Kürşad SEZER | B8.Session | |
| 35 | 17:30-17:45 | Ref. No: 52 Graf Yöntemi Destekli İka Tasarım İçin İşlem Modeli | Cüneyd Demir And Mustafa Bozdemir | B8 |
| 36 | 17:45-18:00 | Ref. No : 58 Powder Properties Used In Powder Bed Additive Manufacturing And Powder Manufacturing Medhods | Uçan Karakılınç, Berkay Ergene And Bekir Yalçın | B8 |
| 37 | 18:00-18:15 | Ref. No: 69 Fusion 360 İle Simülasyon Ve Animasyon | Ceren Yağmur, Dilan Turğut And Kerim Çetinkaya | B8 |
| 38 | 18:15-18:30 | Ref. No: 76 Siklonik Sistemli Elektrikli Dikey Süpürge Endüstriyel Tasarımı Ve Prototipi Üzerinde Testlerin Yapılması | Ömer Şaban Kamber and Hakan Maden | B8 |
| 38 | 18:30-18:45 | Ref. No: 88 Extrusion Based And Continuous Fed Bioprinter Design | Taylan Baran Yeşil, Aşkıcan Hacıoğlu And Cem Bülent Üstündağ | B8 |
| 38 | 18:45-19:00 | Ref. No : 143 Design and Manufacture of Customised Toys Utilising Low Cost FDM 3D Printers | Ali Can Yüceliş, Hüseyin Riza Börklü and Hüseyin Kürşad Sezer | B8 |
| # | Time | Title | Speakers | Session |
|---|---|---|---|---|
| 1 | 09:00-09:30 | Registration | ||
| 2 | 09:30-11:00 | Chairman :Professor Ali R. Tekin | C4.Session | |
| 3 | 09:30-09:45 | Ref. No: 32 Elektromanyetik Atış Sistemleri İçin Dönü Etki Sistemi Tasarımı | Ahmet Bülent Gülver And Mustafa Bozdemir | C4 |
| 4 | 09:45-10:00 | Ref. NO: 45 Uses Of 3-D Printer İn The Manufacturing Of Traditional Turkish Sweets Such As Turkish Delight And Grape Leather | Ali R. Tekin And Hatice Yaprak | C4 |
| 5 | 10:00-10:15 | Ref. No :179 Engelli Ve Yaşlı Bireyler İçin Araç Biniş Aparatı Tasarımı Ve Dijital İnsan Modelleme İle Ergonomik Analizi | İsmail Şahin, Cengiz Eldem, İsmet Karakaş, Ceren Kiraz, Tolgahan Şahin And Cemile Şanlıer | C4 |
| 6 | 10:15-10:30 | Ref. No :51 Conceptual Design Of A New Motor Scythe | H. Rıza Börklü, Cemile Şanlıer And Sema Eryıldırım | C4 |
| 7 | 10:30-10:45 | Ref. No: 63 Tasarımda Fusion 360 Ve Bulut Teknolojileri | H, Busra Cakici And Kerim Cetinkaya | C4 |
| 8 | 10:45-11:00 | Ref. No: 64 Direct Digital Spare Part Manufacturing With The Help Of Reverse Engineering For Maintenance Of Public Transportation Buses | Ali Çağlar Önçağ And Hüseyin Özden | C4 |
| 9 | 11:00- 11:15 | Coffe Break | ||
| 10 | 11:15- 12:45 | Chairman :Professor Ömer Eyercioğlu | C5.Session | |
| 11 | 11:15- 11:30 | Ref. No: 181 Redesign And Simulation Of Ergonomics Analysis With Digital Human Models Of Vehicle Maintenance Channels | Cengiz Eldem, İsmail Sahin, M. Tahir Demir, Neslihan Top And Tolgahan Şahin | C5 |
| 12 | 11:30-11:45 | Ref. No: 48 Effect Of Processıng Condıtions On The Bonding Quality Of Large Scale Additive Manufacturing Components | Omer Eyercioglu, Mehmet Aladag And Samet Sever | C5 |
| 13 | 11:45- 12:00 | Ref. No: 90 3B Yazıcıda Titreşimin Ürünlerin Yüzey Pürüzlülüğüne Etkisinin İncelenmesi | Menderes Kam, Hamit Saruhan And Ahmet İpekçi | C5 |
| 14 | 12:00- 12:15 | Ref. No: 93 Conceptual Design Of An Olive Harvesting Machine | Hüseyin Rıza Börklü And Neslihan Top | C5 |
| 15 | 12:15- 12:30 | Ref. No: 94 Surface Texture Characterization And Parameter Optimization Of Fused Deposition Modelling Process | Binnur Sağbaş | C5 |
| 16 | 12:30- 12:45 | Ref. No: 119 Development Of Hybrid Pattern System For 3d Printing Optimization | Hilmi Saygin Sucuoglu, Ismail Bogrekci, Pinar Demircioglu And Ogulcan Turhanlar | C5 |
| 17 | 12:45-14:00 | Lunch | ||
| 18 | 14:00-15:30 | Chairman :Assist. Professor Murat DİLMEÇ | C6.Session | |
| 19 | 14:00-14:15 | Ref. No: 109 Polylaktikasit (Pla) Numunelerde 3 Boyutlu Yazıcı Parametrelerinin Mekanik Özelliklere Etkisi | Halil Tosun And Ahu Çelebi | C6 |
| 20 | 14:15-14:30 | Ref. No: 190 İnsansız Hava Araçları İçin Otomatik İniş Platformu Tasarımı | Serkan Çaşka | C6 |
| 21 | 14:30-14:45 | Ref. No: 01 3D Modeling And Prototyping (3D Printing And CNC Machining) At The All-Russian Technology Competition For Schoolchildren. | Yury Khotuntsev And Ali Dzhanmamedov | C6 |
| 22 | 14:45-15:00 | Ref. No: 184 Termostatik Elastomer Malzemelerin Eklemeli İmalat Teknolojilerinde Kullanımı Ve Mekanik Özelliklerinin İncelenmesi | Hatice Evlen, Beheşti Sümeyye Semen, Ahmet Turan And Okan Çakır | C6 |
| 23 | 15:00-15:15 | Ref. No: 187 Assembly Line Analysis And Balancing Work: White Goods İndustry Simulation Application | Hayri Özdemir, Filiz Ersöz, Ali Osman Uysal And Taner Ersöz | C6 |
| 24 | 15:15-15:30 | Ref. No: 105 Wear Properties Of SLA Type 3D Printed CNT Reinforced Nano Composites | Bedri Onur Kucukyildirim And Altug Akpinar | C6 |
| 25 | 15:30- 15:45 | Coffee Break | C6 | |
| 26 | 15:45-17:15 | Chairman :Assist. Professor Ahmet CAN | C7.Session | |
| 27 | 15:45-16:00 | Ref. No : 172 İnsansız Hava Araçları İçin Otomatik Batarya Değiştirme Robotu Tasarımı | Serkan Çaşka | C7 |
| 28 | 16:00-16:15 | Ref. No : 102 Sıcaklığın Eklemeli İmalat İle Üretilmiş Parçaların Yüzey Pürüzlülüğüne Etkisi | Fuat Kartal, Celal Nazlı, Zekeriya Yerlikaya, Fadime Şimşek And M. Hüseyin Çetin | C7 |
| 29 | 16:15-16:30 | Ref. No: 186 Performance Measurement With Computer Technologies In Business Administration | Deniz Merdin, Taner Ersöz, Filiz Ersöz And Cemal Cici | C7 |
| 30 | 16:30-16:45 | Ref. No: 106 3d Printing Of Low Temperature Fusible Metal Alloy In Fdm Type 3d Printer | Hulusi Delibaş And Necdet Geren | C7 |
| 31 | 16:45-17:00 | Ref. No: 183 Web Tabanlı 3 Boyutlu Yazıcı Teknolojileri Eğitimi | Hatice Evlen And Alperen Aşçı | C7 |
| 32 | 17:00-17:15 | Ref. No: 134 Topolojik Düğümlerin Fdm Yöntemiyle Üretimi | Seher Demi̇R, Hüseyin Kürşad Sezer And Veysel Özdemir | C7 |
| 33 | 17:15- 17:30 | Coffee Break | ||
| 34 | 17:30-19:00 | Chairman : Assist. Professor Savaş DİLİBAL | C8.Session | |
| 35 | 17:30-17:45 | Ref. No: 101 Eklemeli İmalat İle Üretilmiş Parçaların Taguchi Yöntemi Kullanılarak İşleme Parametrelerinin Çekme Mukavemetine Etkisi | Fuat Kartal, Celal Nazli, Zekeriya Yerlikaya, Fadime Şimşek And M. Hüseyin Çetin | C8 |
| 36 | 17:45-18:00 | Ref. No: 112 Analyzing The Effect Of Voxel Mesh And Surface Mesh Application On Residual Stress By Simufact Additive Software | Ahu Çelebi And Esra Zerina Appavuravther | C8 |
| 37 | 18:15-18:30 | Ref. NO: 185 Process Improvement In Furniture Manufacturing: Simulation Study | Deniz Merdin, Fatma Gül Çelik, Taner Ersöz And Filiz Ersöz | C8 |
| 38 | 18:15-18:30 | Ref. No: 53 İKA Tasarımında Ağırlık Oranı Yöntemi Kullanımı | Cüneyd Demir And Mustafa Bozdemir | C8 |
| 39 | 18:30-18:45 | Ref. No:182 Effect On 3D Prints Of Different Resin Contents Produced For SLA Technology | Ustafa Aydin, Gülgün Satici, Hakan Güzelgöz And Alper Ünlü | C8 |
| 40 | 18:45-19:00 | Ref. No: 20 Roll Form Sistemi Tasarımı Ve Dijital Endüstri | Esra ÇerÇİ and Kerim Çetİnkaya | C8 |
For each additional(Oral/Poster Presenters) Fee (+€50/+100TL)
Registration fees are non-refundable
(Oral/Poster Presenters)
- Without Accommodation
- Lunch & Coffee breaks
- Abstract book
- Conference Bag
- Certificate of participation
- Conference program
Co-authors, accompanying person etc.
- Lunch & Coffee breaks
- Conference program
-
-
-
-
Student
- Free Lunch & Snacks
- Program Table
-
-
-
-
-
Portobello Hotel Resort & Spa,
Antalya, TURKEY
